“SVU Sting” Case
“SVU Sting” Case
Specifications:
- Case weight: 175g
- Material: molded high-strength ABS.
- Compatibility: Mavic, FPV drones, other platforms with appropriate mounting.
Features:
- Secure fixation of the charge during flight.
- Compatible with a wide range of platforms and drop systems.
- Aerodynamic shape for flight stability.
- Manufactured without 3D printing — only industrial molding.
- Easy installation and removal.
“SVUF1” Drop System — a Single Universal System for FPV Drones
“SVUF1” Drop System — a Single Universal System for FPV Drones
Drop system weight: 65g.
Payload weight: up to 2 kg.
Type: single drop.
Material: molded high-strength ABS.
Compatibility: FPV drones, flying wings.
Mounting method: universal zip ties for any frame.
Ability to connect multiple drop systems for phased use.
“SVUM2” Drop System — Dual Release System for Mavic Drones
“SVUM2” Drop System — Dual Release System for Mavic Drones
Drop system weight: 185g.
Weight capacity per load: up to 2 kg.
Type: dual drop system.
Material: molded high-strength ABS.
Compatibility: all DJI Mavic models.
Mounting method: rigid fixation on the drone body.
Operating principle: independent or simultaneous activation of two channels.
Amphibious Drone “VIZ”
Amphibious Drone “VIZ”
- Ability to land on an unprepared shore;
- Ability to navigate against the current;
- Speed on water: ± 10 km/h;
- Speed on land: ± 12 km/h;
- Load capacity: 250–300 kg;
- Range: ± 40 km.
Connectors for Drop Systems
Connectors for Drop Systems
Features:
- Made by thermoplastic injection molding — they don’t break or deform.
- Compatible with all types of manufacturer’s drop systems.
- Can be used with single and double drops.
- Simple connection to the system — ready to operate in seconds.
Advantages:
- Secure cargo fixation even at high speeds.
- Compatible with any type of ammunition or payload.
- Easy replacement and maintenance.
Directional EW “Triptych AM” against Drops
Directional EW “Triptych AM” against Drops
Frequencies: 2400 MHz, 5200 MHz, 5800 MHz;
3 modules of 50 watts;
Antenna angle – 30*;
Suppression at an altitude of 200-500 m, provided that the remote control is removed at a distance at least 3 km;
Active cooling system;
Operating mode: autonomous, from an external battery, or from a car;
Autonomy: -+ 1.5 hours;
When connected to a car battery: recommended operating time is no more than 2-4 hours (turn on the RBS ONLY when the engine is running);
Package contents: REB with internal battery, car connection cable with a switch, charger.
Optional equipment: 24 V 28000 mAh battery.
Directional EW “Triptych M” against Drops
Directional EW “Triptych M” against Drops
Frequencies: 2400 MHz, 5800 MHz;
2 modules of 50 watts;
Antenna angle – 30*;
Suppression at an altitude of 250-500m, provided that the remote control is removed at a distance at least 3 km;
Active cooling system;
Operating mode: autonomous, from an external battery, or from a car;
Autonomy: -+ 2 hours;
When connected to a car battery: recommended operating time is no more than 2-4 hours (turn on the RBS ONLY when the engine is running);
Package contents: REB with internal battery, car connection cable with a switch, charger;
Optional equipment: 24 V 28000 mAh battery.
Drop “FUNDUK” — a Release System for Heavy Drones
Drop “FUNDUK” — a Release System for Heavy Drones
Features:
- Support for individual configuration for any number of drops.
- Cast thermoplastic manufacturing — increased strength and reliability.
- No 3D printing — maximum durability under combat loads.
- Ability to drop ammunition and payloads weighing up to 2 kg each.
- Modular connection — easily integrates with any heavy drone.
Advantages:
- Reliable payload retention even during sharp maneuvers.
- Sequential or synchronous operation (depending on settings).
- Simple integration into the drone’s flight system.
Drop “SVUF2” — Dual Universal System for FPV Drones
Drop “SVUF2” — Dual Universal System for FPV Drones
Drop system weight: 165g
Payload weight: up to 2 kg (or more with powerful platforms).
Type: dual drop system.
Material: molded high-strength ABS.
Compatibility: FPV drones, 7-10″ frames.
Mounting method: universal zip ties.
Operating principle: sequential or simultaneous dropping.

